|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
AOZ8015 6-Line EMI Filter with Integrated ESD Protection General Description The AOZ8015 is a 6-line device integrating EMI filtering with ESD protection for each line. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic discharge (ESD) protection in portable electronic equipment. This state-of-the-art device utilizes AOS leading edge Trench Vertical Structure [TVS]2 TM technology for superior clamping performance and filter attenuation over the full operating display range. The AOZ8015 has been optimized for protection of color LCD displays and CCD camera lines in cellular phones and other portable consumer electronic devices. The AOZ8015 consists of six identical circuits comprised of TVS diodes for ESD protection, and a resistor-capacitor network for EMI/RFI filtering. A series resistor value of 100 and a capacitance value of 20pF are used to achieve -30dB minimum attenuation from 800MHz to 3.0GHz. The TVS diodes provide effective suppression of ESD voltages in excess of 17kV (air discharge) and 17kV (contact discharge). This exceeds IEC 61000-4-2, level 4 ESD immunity test. The AOZ8015 comes in an RoHS compliant, 1.35mm x 3.0mm DFN package and is rated over a -40C to +85C ambient temperature range. Features 6 lines for EMI filtering and ESD protection: - Exceeds IEC 61000-4-2, level 4 (ESD) immunity test - 17kV (air discharge) and 17kV (contact discharge) Trench Vertical Structure [TVS]2 TM based technology used to achieve excellent ESD clamping & filter performance over the full operating display range Filter performance: -30db attenuation from 800MHz to 3.0GHz Low operating voltage: 5.0V Capacitance stability over wide range of voltages and temperatures DFN package 1.35mm x 3.0mm Pb-Free device Greeen product Applications EMI filtering and ESD protection for data lines LCD displays, camera interface, I/O interface Portable handheld devices, cell phones, PDA phones Electrical Schematic (each channel) CHn (n = 1-6) 20pF 100 20pF GND Figure 1. Rev. 1.5 May 2008 www.aosmd.com Page 1 of 7 AOZ8015 Ordering Information Part Number AOZ8015DIL Ambient Temperature Range -40C to +85C Package DFN-12 Environmental RoHS Compliant Green Product * All AOS products are offered in packages with Pb-free plating and compliant to RoHS standards. * Parts marked as Green Products (with "L" suffix) use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information. Pin Configuration 1 12 12 1 2 11 11 Exposed Pad (GND) 2 3 10 10 3 9 4 4 9 8 5 5 8 7 6 6 7 DFN-12 (Bottom View) Top View Pin Description Pin Number 1,12 2, 11 3, 10 4, 9 5, 8 6, 7 Exposed Pad Pin Name CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 GND Pin Function Channel 1 Connections Channel 2 Connections Channel 3 Connections Channel 4 Connections Channel 5 Connections Channel 6 Connections Common Ground Connection Rev. 1.5 May 2008 www.aosmd.com Page 2 of 7 AOZ8015 Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter Storage Temperature (TS) ESD Rating per IEC61000-4-2, ESD Rating per IEC61000-4-2, contact(1) air(1) -65C to +150C 17kV 17kV 30kV Rating ESD Rating per Human Body Model(2) Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5k. Electrical Characteristics TA = 25C unless otherwise specified. Symbol VRWM VBR IR VCL RCH CCH fC Parameter Reverse Working Voltage Reverse Breakdown Voltage Reverse Leakage Current Signal Clamp Voltage Total Series Resistance Channel Capacitance Cut-off Frequency Attenuation from 800MHz to 3.0GHz (3)(8) Conditions 1mA(4) clamp(5)(8) Min. Typ. Max. 5.0 Units V V A V pF MHz dB IT = 6 7 8 0.1 11 -10 VRWM = 3.3V ILOAD = 12A, positive ILOAD = 12A, negative clamp(5)(8) IR = 20mA Input to Ground(6)(7)(8) Measured with 50 source and 50 load termination Measured with 50 source and 50 load termination 90 18 100 20 100 -30 110 22 Notes: 3. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level. 4. VBR is measured at the pulse test current IT. 5. Measurements performed using a 100ns Transmission Line Pulse (TLP) system. 6. Total capacitance is equal to 2 x CCH. 7. Measured at 25C, VR = 2.5V, f = 1.0MHz. 8. Guaranteed by design. Rev. 1.5 May 2008 www.aosmd.com Page 3 of 7 AOZ8015 Typical Performance Characteristics Insertion Loss Characteristics 0 -5 -10 @ 0V Bias @ 5V Bias Typical Line Capacitance vs. Reverse Bias Voltage 23 22 S21 (db) -20 -25 -30 -35 -40 -45 -50 1 10 100 Frequency (MHz) 1000 10000 Capacitance (pF) -15 21 20 19 18 1 2 3 4 5 Reverse Biased Voltage (V) Analog Crosstalk 0 12 11 -20 Clamping Voltage vs. Peak Pulse Current Forward Voltage (V) 10 9 8 7 6 S21 (db) -40 -60 -80 -100 1 10 100 Frequency (MHz) 1000 10000 5 0 2 4 6 Current (A) 8 10 12 Clamping Voltage vs. Current 12 110 Typical Resistance vs. Temperature 10 Clamping Voltage (V) 105 Resistance () 0 2 4 6 Current (A) 8 10 12 8 6 100 4 95 2 0 90 -45 -25 -5 5 25 45 65 85 Temperature (C) Rev. 1.5 May 2008 www.aosmd.com Page 4 of 7 AOZ8015 Package Dimensions, DFN 1.35 x 3.0, 12L 0.15 C D F 12 D1 L 7 8 9 10 11 12 0.15 C CB L E E1 6 5 4 3 2 1 Pin 1 Marking 1 Pin 1 ID (C0.2x45) A C L e b TOP VIEW BOTTOM VIEW 0.10 C A 0.08 C Dimensions in millimeters Symbols A A1 A3 b D D1 E E1 e L F Min. 0.45 0.00 Nom. Max. 0.50 0.55 0.02 0.05 0.152 REF 0.20 0.25 0.30 2.90 2.10 1.25 0.20 0.20 3.00 2.20 1.35 0.30 0.50 BSC 3.10 2.30 1.45 0.40 Dimensions in inches Symbols A A1 A3 b D D1 E E1 e L F Min. 0.018 0.000 Nom. Max. 0.020 0.022 0.001 0.002 0.006 REF 0.008 0.010 0.012 0.114 0.083 0.049 0.008 0.008 0.118 0.122 0.087 0.091 0.053 0.057 0.012 0.016 0.020 BSC 0.012 0.016 0.008 REF SIDE VIEW A1 A3 C RECOMMENDED LAND PATTERN 2.20 0.20 0.35 0.30 0.40 0.20 REF 0.30 1.10 0.50 0.25 0.20 UNIT: mm Notes: 1. All dimensions are in millimeters. Angles is degree. 2. Coplanarity applies to the exposed pad as well as the terminals. Coplanarity shall not exceed 0.08mm. 3. Warpage shall not exceed 0.10mm. 4. Package length/package width are not considered as special characteristic. 5. Refer JEDEC MO-229. 6. Marking is for package orientation reference only. Rev. 1.5 May 2008 www.aosmd.com Page 5 of 7 AOZ8015 Tape and Reel Dimensions, DFN 1.35 x 3.0 Carrier Tape A-A K0 R0.1 Typ. E2 E P1 P2 D0 D1 A E1 B0 T P1 A0 A Feeding Direction Unit: mm Package DFN 3x1.35 A0 1.60 0.10 B0 K0 D0 D1 E 3.25 0.70 1.55 1.00 12.00 0.10 0.10 0.05 +0.25/-0 0.30 E1 1.75 0.10 E2 5.50 0.05 P0 4.00 0.10 P1 4.00 0.10 P2 2.00 0.10 T 0.25 0.05 Reel W1 S G M V R H W N K Tape Size Reel Size M N 12mm o330 o330.00 o97.00 0.50 0.10 W 13.00 +0.30 W1 H K 17.40 o13.50 10.60 1.00 +0.50/-0.20 S 2.00 0.50 G -- R -- V -- Leader / Trailer & Orientation Trailer Tape 300mm min. or 75 empty pockets Components Tape Orientation in Pocket Leader Tape 500mm min. or 125 empty pockets Rev. 1.5 May 2008 www.aosmd.com Page 6 of 7 AOZ8015 Part Marking AOZ8015DIL (1.35 x 3.0 DFN) AAWLT Part Number Code Underscore Denotes Green Product Assembly Lot Code Week and Year Code This data sheet contains preliminary data; supplementary data may be published at a later date. Alpha & Omega Semiconductor reserves the right to make changes at any time without notice. LIFE SUPPORT POLICY ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Rev. 1.5 May 2008 www.aosmd.com Page 7 of 7 |
Price & Availability of AOZ8015 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |